Installation Guide

How to Install Your Khae Ma Ku Auto Floor Mats

Front Driver & Passenger Mats

  1. Place the mats in position — Place each mat in the correct footwell and align it with the shape of the floor.
  2. Start from the front — Push the front/top edge of each mat firmly into position under the dashboard area.
  3. Fit the sides — Adjust the edges so the mats sit neatly against the sides of the footwell and lie flat.
  4. Check the fit — Make sure each mat is correctly positioned before securing it.
  5. Use the complimentary Velcro if necessary — If additional hold is needed, use the complimentary Velcro provided. Position the mat first and make sure the Velcro lines up exactly with the Velcro on the mat before attaching it.
  6. Secure the mats — Press the mat firmly onto the Velcro attached to the vehicle to secure it in place.
  7. Final check — Make sure both mats sit flat, are correctly aligned and remain securely in position.

Rear Seat Row Mat

  1. Place the mat in position — Lay the rear mat across the rear footwell and centre it before securing anything.
  2. Start from the centre — Tuck the top edge of the mat under the rear seat, starting from the centre and working your way out toward both sides.
  3. Fit the sides and centre section — Adjust the mat around the rear footwell and centre tunnel so it follows the shape of the vehicle and sits neatly.
  4. Check the fit — Make sure the mat is correctly aligned and sitting flat before attaching any Velcro.
  5. Use the complimentary Velcro if necessary — If extra hold is needed, use the complimentary Velcro provided. Make sure the Velcro lines up exactly with the Velcro on the mat before attaching it.
  6. Final check — Press the mat firmly into position and make sure it is secure, properly aligned and does not interfere with the seat rails.

 

⚠ Driver-Side Safety Check

Before driving, make sure the driver mat is properly positioned, secure and does not interfere with the accelerator or brake pedal. Do not drive if the driver mat is loose, incorrectly positioned or interferes with pedal operation.

Tips: The complimentary Velcro is optional and can be used if additional securing is required.

Make sure the mat is correctly positioned before attaching the Velcro to the vehicle.

Fitting the Floor Mat Under the Seat (Driver seat or Passenger seat)

  1. Slide the seat backward to create space for fitting the floor mat.

  2. Slowly slide the seat forward while carefully guiding the mat underneath to ensure it fits neatly. If not, gently push the mat down while slowly sliding the seat forward to help it fit neatly underneath.

  3. Check the fit to make sure the mat sits flat without folding or interfering with the seat rails.

Need help? Refer to the pictures or installation video for a clearer demonstration.

💡 After Installation Tip

Your mats may be folded during packaging to help reduce packaging size and ensure efficient shipping. After unpacking, you may notice temporary folds or creases.

After installation, allow the mats some time to settle naturally into position. The time required may vary depending on storage, transport and environmental conditions.

Need help with installation? Watch our installation video for helpful tips and guidance.